Rotor Mill Machine with Tungsten Powder

Rotor Mill Machine With Tungsten Powder is well balanced, only need to be produced in a smooth ground, low noise, can avoid dust leakage during the pulverization process, favored by the powder industry.

Rotor Mill Machine with Tungsten Powder is mainly after accelerating compressed air or inert gas, using high-speed elastic fluid (300 ~ 500 m / s) or overheating steam (300 ~ 400 ° C) energy, Between the particles, between the gas and the particles, the particles and the wall and other components produce strong impact, shear, collision, friction, etc., at the same time, under the action of the airflow rotation, or with the classifier, Make the thick particles to achieve ultra-fine pulverization.
Rotor Mill Machine With Tungsten Powder is a common preparation method for pharmaceutical powder, suitable for antibiotics, enzymes, low melting points and other thermal drugs. With the continuous advancement of ultrafine pulverization technology, it will play an increasingly important role in the pharmaceutical industry.
Alpa Aluminate Rotor Mill Machine with Tungsten Powder case share: The company discovered that domestic ultrafine pulverization equipment has been flattened in foreign countries. And the price is more advantageous than foreign similar import companies. Finally, our Rotor Mill Machine with Tungsten Powder as a production equipment.

Finished granularity: D97: 20μm
Production capacity: 100kg


Ultrafa Rotor Mill Machine with Tungsten Powder uses air separation, heavy polishing, shear The form of ultrafine pulverized equipment in the form of dry materials is widely used in various industries. Let's take a brief introduction to its daily maintenance content.

2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, the total load of the machine is the bearing, so good lubrication and bearing service life have a large relationship, it can directly affect the service life of the machine and the operating rate, so that the injection of lubricating oil cleanlinessIt is necessary to meet the standard and seal well.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.

ALPA also believes that future airflow crushing technologies will become better and better, users who need to purchase such products can contact us.