Turbo Grinder with ammonia rubber coating

Most of the product production and processing of the current stage, using Turbo Grinder with ammonia rubber coating is a very common way to work with a very common way, with the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Turbo Grinder with ammonia Rubber Coating temperature increases, when the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.
ALPA Quartz, Silicon Powder Turbo Grinder with Ammonia Rubber Coating Case Sharing:

A new material company mainly engages new materials technology development, consulting services, silicon micron powder processing and quartz product sales. We have always provided customers with good products and technical support, improve after-sales service;

case parameters:
Product particle size: D99: 5.5UM D100: 10UM
Hour Yield: 200-700KG
[123 ] How to solve Turbo Grinder with ammonia rubber coating is too much noise? Let's take a look.
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.

2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.

3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.

Shandong AlPa is a well-known particle and powder processing system supplier, which is committed to the change of traditional powder industry. We provide customized and passed CE certified products: airflow pulverizer, mechanical pulverizer, airflow classifier, ball milling production line, surface modification production line, etc. In medicine, food, chemical, minerals, new materials, solid wasteWhenever industrial sector, we have a mature full-specific solution.We provide more than just machines.We help you design the ideal system to meet your needs.In the past 20 years, \"the future\" of the advanced materials in powder technology \"has always been our company mission.We look forward to and desire to embrace the future.To this end, we have made full preparation.We wish to grow together with you.