Cell Mills for SDS Dry DesulFurization

With the rapid growth of China's economy, high-energy mining machinery industry, especially Cell Mills for SDS Dry DesulFurization will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.

Cell Mills for SDS Dry DesulFurization is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

ALPA High Pure Stone Powder Cell Mills for SDS Dry DesulFurization Case Sharing:

A quartz company collects mining, processing in one, production scale and market share are in front of domestic counterparts.

The company has strong technical strength, advanced testing instrument, perfect pre-sales, sale, after-sales service.
The company continues to improve and improve product quality, adopted IS09001: 2008 international quality management system certification, the company strives to meet customer requirements with excellent product quality and quality service.
Case parameters:
Product particle size: D50: 3.5UM
Hour Yield: 800kg

When you purchase Cell Mills for SDS Dry DesulFurization, you need high pulverity and no loss. However, before purchasing, it is necessary to fully understand the internal structure of the ultrafine pulverizer and the advantages and disadvantages in the production application. After fully understanding, we can better choose and apply. Today, let us understand the disc air pulverizer:

1. Low powder temperature: no cooling system during continuous operation, the powder temperature generated Never less than 50 degrees;

2. It can be applied to any fiber, high toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%; 123]
3. Can be pulverized by adding water, alcohol or other liquid, or by introducing gasThe body is protected;

After you understand the characteristics of the ultrafine pulverizer, you should pay more attention to it when you buy it later, and then you will choose your satisfactory super fine pulverizer.

If you have the situation about other crushers, you want to know, welcome to consult!