Pin Grinder of Sulfur

Modern production not only pursues production and finished product quality, but also develops toward environmental protection. In particular, in the comminution industry, the overall development trend of PIN GRINDER OF Sulfur technology in my country is the stable development of the PIN Grinder of Sulfur technology.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.


ALPA Quartz Powder PIN Grinder of Sulfur Case Sharing:
Silicon Microfubin Company's main products include molten stone sand, molten silicon fine powder, soft composite silicon fine powder, high purity ultrafine silicon powder , Activated silicon fine powder, crystalline silicon fine powder, spherical silicon fine powder and other specifications.
Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.

Product particle size: Remove 20UM with fine powder
hour yield: sorting efficiency 60-90%

Precautions must be considered before use, pay attention to use , Operation, make the damage rate can be minimized, then what should I pay attention to before using PIN Grinder of Sulfur?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.

4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.

If you need to learn moreFor consultation, please pay attention to us, or inquire.