Ring Roller Grinder of Black and White Carbon

We all know that Ring Roller Grinder of Black and White Carbon is a very strong airflow, many stubborn and hard materials come into a shredder to be cut into a uniform block,

[123 ] Ring Roller Grinder of Black and White Carbon is mainly used for more refined materials. The pulverized particle diameter is 1.5 to 0.005 mm, and the crude material is sieved.

The principle of pulverization is substantially the same as the hydraulic level, and the above settlement theory can also be used for airflow classification. However, in the airflow classification, since the density and viscosity of the air are much smaller than the density and viscosity of water, the same particles are more settle more in the air than in the water. Moreover, the density and viscosity of the air varies with temperature and pressure.
In order to cause air flow, wind pulverization equipment typically requires an appropriate fan (exhaust or blast).

When the airflow is classified, the fine particles are typically taken away by the airflow. In some cases, the raw material is sent to the gas stream into a pulverized device.

It is well known that the load of solid particles in air under normal pressure does not exceed 500 g / m3 air. When it reaches 1 kg / m3, the particles fall from the airflow. The load is related to the density and particle size of the particles. When the fine particle material is treated, the load generally does not exceed 200 to 300 g / 3 air. According to this calculation, the volume concentration of the solid in the gas stream is much smaller than 0.03. Therefore, when the airflow is classified, in most cases, it belongs to the free settlement.

The speed required to move the particulate material in the horizontal and vertical directions is relatively large, and the speed required in the horizontal direction is relatively large, and as the particle density increases, for example, for the density 1.5 of the pulverization coal per centimeter. The minimum wind speed is 2 m / sec; a powder material having a density of 2.5 g / cm, the speed is not less than 3.5 m / sec; a powder having a density of 4 g / cm 3, a minimum speed of 4 meters per second. Due to the complexity of the situation, the appropriate airflow rate in each particular situation should be determined by experiments.

In the rising airflow, the airflow speed required to suspend a certain density and particle size is greater than the calculated value of free settling, which is due to the uneven distribution of the airflow along the pulverizing chamber portion.

The RING ROLLER GRINDER OF Black and White Carbon has the characteristics of high pulverization, high pulverization efficiency, high pulverization accuracy, accurate cutting particle size, and good stability.
ALPA Carbonate Ring Roller Grinder of Black and White Carbon Case Sharing:
A lithium industry company is an extraction systemLithium battery positive raw material - new energy high-tech enterprise with lithium battery grade carbonate. The main product of sodium sulfate, battery-grade carbonate, and other products of industrial grade carbonate. The company has passed the certification of the Quality Management System, \"Environmental Management System\", ISO50001 \"Energy Management System\".
Case parameters: D50: 5.5μm

Hour Yield: 900kg

Ring Roller Grinder of Black and White Carbon's crushing effect is not ignored, playing in production The role is huge, so Ring Roller Grinder of Black and White Carbon selection is very important.
1. Analyze the type, design principles and other equipment of the purchase equipment, what is the structure, what effect does it, only fully analyzes and understands these issues, in order to make the selected device fully meet its production requirements.
2, after the equipment is put into production, the easy-to-lose parts, the time required for the loss, whether the equipment needs to be auxiliary equipment and operations,
3, reasonable control These will save time and money for future production.

4. To check the factory where you want to buy equipment, because the factory is very costly, and it is very complicated from design to manufacturing. Equipment manufacturers cannot fully introduce it. The device technical indicators given are also referenced by the device selection. You cannot completely represent the parameters of the device.

5. When purchasing a crusher, we should purchase a supporting equipment as much as possible to complete the installation, save time, smooth production.
Since the equipment manufacturer recommended with the host-related auxiliary equipment is practical, if it is recommended to use bad equipment to customers, it is undoubtedly a brand. Although it has certain profit purposes, its use and equipment are reasonable, it is established in later. Maintenance is also very convenient, this is a good thing for crushing manufacturers.

The company provides free experiments and testing, and provides 24-hour consultation services, welcome to use.