Turbo Mill Machine with Sorghum

Turbo Mill Machine with Sorghum is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

In terms of airflow mill, first It is very important to understand that it is very important because it is only familiar with the operating procedure to operate correctly.
1. The operation rules of Turbo Mill Machine with Sorghum are as follows: Prepare materials before the preparation of the production order is received. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Turbo Mill Machine With Sorghum starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures of Turbo Mill Machine With Sorghum are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


ALPA pea protein Turbo Mill Machine with Sorghum case sharing: This customer is a food company in Russia. After looking for many powder equipment companies, they have not found appropriate equipment. It has been affected the company's production and operation, and finally I saw the ultrafine pulverization of pea protein before our website. Finally, through the incoming experiment, I finally determined the Turbo Mill Machine with Sorghum purchased our company.
Technical parameters:
Finished particle size: 400 mesh

Sometimes it will appear in the use of Turbo Mill Machine with SorghumA large amount of dust, if there is a lot of dust, it will have a certain impact on the environment. What should we handle?
Next, a few ways:
1, install the dust collector: generally now this dust collector can be matchedThe powder classifier is used, it discharges the dust income to the bag, and the dust is filtered by the dust box;

3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

Users who need to purchase Turbo Mill Machine With Sorghum products can choose Shan Dong Alpa. This is a manufacturer specializing in the production and sales of all kinds of eddy current crushers, affordable, after-sales service.