Rod Pin Pulverizer with Pesticides and Pesticides

Rod Pin Pulverizer with psticides and pesticides are commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Many manufacturers who want to make a crushing process will choose to buy a Rod Pin Pulverizer With Pesticides and Pesticides, but not all crushers can apply production and processing, erroneous processing methods make pulverizer wear velocity Go fast. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large.

The device operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement losses.
The product after the crushing products are generally single peaks. If there is a double-peak or multimodal main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest gas supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.
Alpa Solid mannitol Rod Pin Pulverizer with psticides and pesticides case sharing: a food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our ALPA, the company purchased 1 Rod Pulverizer with Pesticides and Psticides of our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.

Technical parameters:

finished particle size: mannitol: greater than 710 um accounts for 7.34%
Production capacity: Mannitol: 2T


Rod Pin Pulverizer with pesticides and pesticides Causes and Solution can be carried out from the following aspects:

1. Hand-mounted installation errors in maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all in the crusherThe hammer must be turned out together, otherwise a strong vibration occurs during operation.

2, the difference between the weight of the two sets of hammer exceeds 5 grams.The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation.After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation.The solution is to school straight or replacement.
6, the bearing gap exceeds damage.It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running.The solution is tightening.


Today, I will introduce you to here, I want to know more information, please continue to pay attention to our website.