Cell Mill Machine of Talc Milling

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Cell Mill Machine of Talc Mill can improve the extent of the material and greatly improve productivity. Cell Mill Machine Of Talc Milling is highly concerned, and the prospect has also been optimistic about many people.

Cell Mill Machine of Talc Milling is an apparatus that utilizes air separation, heavy polishing and shear to achieve dry material. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material acquisition system, and the like. The material enters the cylindrical crushing chamber through the feed port and is pulverized and pulverized by a grinding wheel moving around the wear rail. The pulverized material is taken out from the crushing chamber through the negative pressure air flow caused by the fan and enter the material collection system. After filtering the filter bag, the air is discharged, collecting materials and dust, and completes broken.

ALPA crystal sorbitol Cell Mill Machine of Talc Milling case Sharing: Taiwan's cosmetics companies need a large amount of crystal sorbitol with large capacity, through our Shandong Alpa agents to understand that our company can crush The equipment is customized. After many incident experiments. In the end, I purchased a Cell Mill Machine of Talc Milling.

Technical parameters:
finished particle size: 10-200 目
Production capacity: 10T

Cell Mill Machine of Talc Milling daily maintenance

1, during production, The temperature rise of the bearing must be checked frequently, and when the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.


Users who need to purchase Cell Mill Machine of Talc Milling products can choose Shan Dong Alpa. This is a manufacturer specializing in the production and sales of various eddy current crushers, affordable, after-sales service.