Rotor Mill Machine for Calcium Sulfate

Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder on materials, Rotor Mill Machine for Calcium Sulfate is the most effective One of the equipment. In my country, after 20 years of development, Rotor Mill Machine for Calcium Sulfate has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.

Rotor Mill Machine for Calcium Sulfate Main Performance Features:

1, which contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, granular shape, narrow particle size distribution . It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.


ALPA Paint Slazing Rotor Mill Machine for Calcium Sulfate Case Sharing: This customer is to investigate the domestic similar enterprises, and have not found a crusher that can smash the paint slag. Finally, I know that our Shandong Alpa is a non-standard custom-made enterprise that is a super-smashing equipment, and I have found us. We have repeatedly tried, and we found a super-pulverizing machine suitable for crushing paint slabs. Finally, the customer purchased our company's Rotor Mill Machine for Calcium Sulfate, the most crushed oil paint slag.
Technical parameters:

finished product grain size: D90: 800 目

Production capacity: 800-1000kg


How to control the particle size size?
raw materials The smaller the particle size, the higher the pulverization efficiency, the greater the particle size of the raw material, then the pulverization effect is relatively low. In the case of crushing pressure and feed pressure, reduce the feed speed product will be finer, and improve the feed speed product will become thick. In the case of a feed rate, the particle size of the pulverized pressure is improved, and the pulverization pressure is reduced, and the product will become thick.

So the particle size control is the adjustment of the parameters during the pulverizer to achieve different pulverized fineness, and it is necessary to measure the relationship between the feed velocity and pressure before crushing and then determine the appropriate pulverization parameters.

For more consultation, please pay attention to us, or inquire.