Hammer Mill Machine of Metal Oxide

With the development of society and life, the demand for Hammer Mill Machine of Metal Oxide is increasing, and the requirements for fineness, purity and pass rate are increasing. In the current market, there is a great development space.

Hammer Mill Machine of Metal Oxide is a high-speed airflow for forming a plurality of relative-arranged nozzles to achieve ultrafine pulverization. The crushed material enters the pulverizing chamber with the rising air flow, since the pulverized rotor is high-speed rotation, the particles are subjected to the centrifugal force generated by the pulverized rotor, and the center of heart is generated by the viscous action of the gas flow. When the centrifugal force of the particles is greater than the heart force, that is, the pulverized particle size The coarse particles return to the pulverizing chamber to continue the impact, fine particles flow into the cyclone separator, collectors, and the gas is discharged from the air.

Low temperature without media, ensuring high purity and physical properties of the product. The equipment runs no dust pollution in a negative pressure state. The full use of jet flow can increase the pulverization efficiency of 30% compared to conventional gas flow grinding machines, and the precision is higher.

ALPA equipment is small, and the structure of the pulverizer can be highly machined so fine powder, avoiding the wear of the horizontal crusher pulverized part, and the equipment of the equipment is used under the same material. Multiplier. Small granularity is wide, and the product particle size can be arbitrarily adjusted within 1-74um.

ALPA Battery Hammer Mill Machine of Metal Oxide Case Sharing:

A new material company is a modern high-tech private enterprise integrating R \u0026 D, production and sales. The company teamed up with the research team of many universities to transform the international leading patented technology to high-tech products, filled the domestic technical gap. The company will rely on lithium-electric positive material materials as the core, with its company to form an interrelated, left and right support, collaborative support, comprehensive utilization cycle industrial chain.
Case parameters
Product particle size: 2-45um
Hour Yield: 200-300KG

How to continue Hammer Mill Machine of Metal Oxide life? Here are the following aspects:

1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.
2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, special greaseUse, and degree 265-295.
6, the cycle of the bearing is 2000 hours.The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease.Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.

If you still have questions, you can directly contact the ALPA Technology Co., Ltd., warmly welcome users to come to consult, our company equipment is manufactured, the size is complete, there is a suitable for you!