Vibration Mill Machine Of Wood Fiber

Since the 1980s, with the development of the national economy, more and more industries need to dry ultra-fine powder mills on materials, Vibration Mill Machine of Wood Fiber is the most effective in achieving ultrafine powder grinding of powder. One of the equipment. In my country, after 20 years of development, the Vibration Mill Machine of Wood Fiber industry has been widely used in pesticides, food, medicine, fine chemical, electronic battery materials and other fields.

Vibration Mill Machine Of Wood Fiber has a wide range of smudges, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

ALPA Trimata Vibration Mill Machine of Wood Fiber Case Sharing:

A lithium-electric material company main product is \"lithium electrode material\", the most important component of the lithium ion battery includes an electrolyte, isolation material, Positive electrode material, negative electrode material, housing, etc. High-end lithium battery sector for safe longevity life performance.
Case parameters:
Product particle size: D50: 9.1μm
Hour Yield: 300kg

Ultrafa Vibration Mill Machine of Wood Fiber Installation and commissioning five major precautions

1, ultra-smash When the machine is fixed, it should be installed on the cement base, and the flow operation should be installed on the four-wheel front bumper.
2, the ultrafine pulverizer should select the power machine according to the prescribed power supply, and ensure its rated working speed, it is strictly forbidden to speed up, otherwise it will cause personal safety accidents.
3,The ultrafine pulverized machine belt should be parallel to the power wheel, the axis is parallel, the triangular belt must be on a flat line, rotate with hand, and tighten appropriate.There is sometimes hit when transportation, and whether there is an abnormal phenomenon such as bumps in front of the inspection machine, if there is a timely adjustment or exclude.
4, pick up the power, let the machine operate in the working condition, control the switch position, should be free, keep the workplace smooth, and ensure convenient operation.
5, after the connection is completed, the bearing should fill the butter, the bearing cover is the semi-automatic butter cup, and the cacrid is added to the bottom, which can be repeated several times, and the oil should be worked.Keep the bearing life.

Vibration Mill Machine Of Wood Fiber has a lot of use, and I want to know more about the ultra-fine gantry classifier, welcome to consult with us!