Rotor Mills of Needle-Like Plaster

Rotor Mills of Needle-Like Plaster is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good precision.

Rotor Mills of Needle-Like These features:

Using high pressure airflows to stroke themselves, ensure the purity of materials, facing individual hardness, high materials, can use high-hardness ceramic corundum as a pulverized chamber, greatly reduce material on the wear of the mill To ensure that the purity of the material is pulverized, the inert gas can be pulverized, such as nitrogen, carbon dioxide, is suitable for high activity, flammable and explosive non-metallic mineral powder.

High capacity, fast efficiency; compared with other ultra-fine pulverizations of the same capacity, due to the continuous feed of Rotor Mills of Needle-Like Plaster, continuously pulverized, continuously collecting characteristics makes it smashed Improve, re-cooperate with the mode of automation control, so that its advanced degree is much higher than other devices.

The structure is simple, the disassembly and cleaning is convenient, there is no need to lubricate oil, etc.

The product is fine, the particle size distribution is uniform, because the grading effect of Rotor Mills of Needle-Like Plaster makes it excellent in the ultrafine powder produced by it, and then cooperate with Rotor Mills of NEEDLE-LIKE PLASTER is used to make the product particle size and distribution far better than the processing of other equipment.

A new energy company is a high-tech enterprise focusing on high performance lithium battery materials, the company's main business The field involves R \u0026 D, production and sales of battery materials and development and technology transfer of battery technology.
The company is based on the development of lithium battery materials and technology. The company adheres to the innovation of science and technology, leading the future concept, and grows forward to new energy technology companies with core competitiveness.
Case parameters:
Product particle size: go to 3UM fine powder
Hour Yield: 150kg

Before the device is turned on, the connection site , Seal and lines, etc., in detail, everything is not problematic, and the powder classifier can be run.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load.The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.