Rod Pin Crusher of 4a Zeolite

Most of the product production and processing of the current phase use Rod Pin Crusher Of 4a Zeolite to use ROD PIN CRUSHER OF 4A ZEOLITE to make products in the product, one of the very common ways of processing, with the continuous improvement of scientific productivity, grading equipment Technology is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the strong centrifugal force of ROD PIN CRUSHER OF 4A Zeolite, the thickness of the material is separated from separation, the fine particle size of the pulverization wheel into the cyclone separator and dust removal, continues to be pulverized.

The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.

Alpa Quartz Powder Rod Pin Crusher Of 4a Zeolite Case Sharing:
The main products of a silicon micron powder include molten stone sand, molten silicon fine powder, soft composite silicon fine powder, high purity ultrafine silica, active silicon fine powder , Crystalline silicon fine powder, spherical silicon fine powder and other specifications are complete.
Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour yield: sorting efficiency 60-90%

Rod Pin Crusher of 4a Zeolite Job Safety Application Basic Requirements
1
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the working efficiency of the pulverizer.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

The Shan Dong Alpa is a scientific and technological private enterprise that produces a variety of airflow pulverities, integrating development, manufacturing, and application. The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.