Rotor Mill of Wax

Rotor Mill of Wax is one of the common ultra-fine pulverization methods, widely used in ultrafine pulverization or fine pulverization of materials such as non-metallic mine, pharmaceutical, chemical, metallurgical and other industrial materials, has a fine particle size, narrow particle size distribution, particle The surface is smooth, the particle rules, high purity, and high activity.

The variety of Rotor Mill of Wax is very large now, and its crushing quality and level are very large. In general, assessing crushing properties in crushing is expressed in crushing efficiency, pulverizing precision. However, the definition of crushing efficiency and pulverization accuracy has many inconveniences in practical applications. Through the general definitions of the crushing efficiency of the assessment of unity and disadvantage of the assessment of crushing properties.

AlPa Quartz Sand Rotor Mill of Wax Case Sharing: This customer needs to be air-flowing to quartz sand, compared with multiple powder equipment manufacturers, and finally pass the experiment, finally choose our AlPA classifier equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.

Rotor Mill of Wax is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.
2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.

(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Shan Dong Alpa is committed to Rotor Mill of Wax, has a mature process, strong technical force, specializing in crusher research and development, survive by quality, welcome everyone to come to consult.