Hammer Mill for PEA

Most of the product production and processing of production and processing in the current stage is a very common way to process the process of processing, accompanied by the continuous improvement of scientific productivity, and the technology of grading equipment is replaced. It is also imminent. The performance and internal configuration of the grading device of the airflow must also keep the trend of the era to continue the upgrade of the product.

Hammer Mill for PEA is different from other pulverizer, which is smashed by collision between particles, airflow impact and shear, high-speed airflow of material, shock, friction and shear and other components grinder. It has the following main features:

1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.

ALPA Trimel Formate Hammer Mill for PEA Case Sharing:
A new energy technology company is a lithium-ion power battery specializing in new energy vehicles, lithium-ion batteries and lithium ions with energy storage High-tech enterprises in the R \u0026 D and industrialization of battery key materials, take the lead in achieving large-capacity manganese lithium-ion batteries in scale production and marketization application of power battery companies.
Case parameters:
Product particle size: D50: 3-25UM

Hours Yield: 3-10kg

Ultra-micro Hammer Mill for PEA is the use of air separation, heavy polishing, cutting Forms to realize the ultra-smuggle equipment for dry materials, and are widely used in various industries. Let's take a brief introduction to its daily maintenance content.
1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.
2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.

4, all loads of the machine are bearings, so good lubrication and bearing service life have a large relationship, it can directly affect the service life of the machine and the operating rate, which requires the injected lubricating oil cleanliness to meet the standard, which is good.

5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.

Shandong AlPa is a source manufacturer specializing in Hammer Mill for PEA. All the year round provides equipment for domestic and foreign customers. Welcome to inquire!