Ring Roller Crusher of Hydrotalcite

With the continuous development of pulverizer technology, Ring Roller Crusher of Hydrotalcite has gradually penetrated into daily life.

What is the design structure of RING ROLLER CRUSHER OF HYDROTALCITE?

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the granularity of the Ring Roller Crusher of Hydrotalcite can be adjusted. The gradular weight product can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.


ALPA airgel Ring Roller crusher of hydrotalcite case sharing: This customer is a high-tech enterprise in R \u0026 D, production and sales of nano-energy, fireproof, insulation, new materials, its production process The ultrafine pulverizer is required, and the multi-party examines the last purchase of our Alpa's Ring Roller Crusher of Hydrotalcite.
Technical parameters:
Finished granularity: D90: 15-30UM

After long-term use, it is necessary to clean Ring Roller Crusher's Hydrotalcite. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and must never be damaged by machine components.

To learn more about Ring Roller Crusher's knowledge, you will go to Shan Dong Alpa, the company is in the development and production of crusher and crusher related products, quality multiplication, and is very trustworthy.