Ring Roller Mill for Polishing Powder

Ring Roller Mill for Polishing Powder is a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from dozens of minor tests to the time A large-scale production of hundreds of tons, Ring Roller Mill For Polishing Powder With a narrow particle size distribution, the average particle size is fine; the powder has good shape, high product purity; suitable for low melting point, thermal drugs; good sealavish, less pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

Ring Roller Mill for Polishing Powder has generally replaced traditional mechanical pulverizer in real-production, and its characteristics are:

1. Simple structure, Disassembly and packing is simple, convenient, just one person can complete the operation, disassembly and cleaning.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, RING ROLLER MILL for Polishing Powder The purity of the finished product due to its pulverization principle, no impurities, non-polluting materials.
4, the pulverization is good, the particle size distribution is uniform.

The above is the application for you about Ring Roller Mill for Polishing Powder in the industry.



ALPA lithium iron phosphate Ring Roller Mill for Polishing Powder case share: This customer is expanding the production process, through comparison, discovering the performance of our ALPA's phosphate special crusher, etc. It is no longer than the same type of equipment in other powder equipment companies at home and abroad, and even in some aspects there are unique advantages. After experimenting, the company purchased Ring Roller Mill for Polishing Powder.
Technical parameters:

Production capacity: 400kg


Ring Roller Mill for Polishing Powder should maintain and maintain
1, before use, first Checking all standard parts of the device not tightening, the belt is tight.

3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent crash or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.



Weifang ALPA well-known airflow crushing equipment brand, free to provide professional transport programs, German advanced technology, stable performance, high efficiency, support customization !!!