Pin Mills of Yellow Pigment

In many crushing methods, pin mills of Yellow Pigment has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

pin millS OF YELLOW PIGMENT is mainly mainly after the material accelerates into supersonic flow through the nozzle, and the compressed air enters the flow of the pulverization region, and the material is fluidized, each particle has the same motion state. . In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

ALPA Trimage Pin Mills of Yellow Pigment Case Sharing:
A lithium electrode material company main product is \"lithium-electrode material\", the most important constituent material of lithium ion battery includes electrolyte, isolation material, positive electrode Materials, negative electrode materials, housing, etc. High-end lithium battery sector requirements for sexy life life.
Case parameters:
Product particle size: D50: 9.1μm
Hour Yield: 300kg

How to solve the problem of Pin Mills of Yellow Pigment noise? Let's take a look.
1. If a lubricating oil is added to the rotating section, if the bearing and the shaft are relieved, the bearing will be adjusted; if the bearing wear is impeded, the bearing will be replaced.
2. There is also noise during the pulverization. The cooling sleeve can be used to reduce the temperature, which can allocate water in the crushing chamber.
3. Install a muffler on the fireplace of the crushing room.
4. Resistance equipment, such as using damping boards.

Today, I will introduce you to here, I want to know more information, please continue to pay attention to our website.