Rod Pin Mills of LTCC Glass Powder

Rod pin mills Of LTCC Glass Powder As the nameship is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Rod pin mills of LTCC Glass Powder is precisely pulverized with ultra-fine powder, especially high-end powder materials, which can provide high performance pulverization effects that may be achieved in other forms of crushing equipment. After pulverizing treatment, the particle size range is narrower. More than three different particle size ranges of peaks, greatly improve the added value of powder raw materials; there is a wide range of applications in metal and non-metallic fields.

ALPA paint slag ROD PIN MILLS OF LTCC Glass Power Case Sharing: This customer is an investigation of similar domestic companies, and did not find a crusher who can smash the paint slag. Finally, I know that our Shandong Alpa is a non-standard custom-made enterprise that is a super-smashing equipment, and I have found us. We have repeatedly tried, and we found a super-pulverizing machine suitable for crushing paint slabs. Finally, the customer purchased our company's Rod Pin Mills of LTCC Glass Powder, the most crushed oil paint slag.

Technical parameters:
finished particle size: D90: 800 目
Production capacity: 800-1000kg

Rod Pin Mills of LTCC Glass Powder's daily maintenance

1, production In the process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50 ° C, it should be closed, and the reason is to rule out the fault.
2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.
3, if the loss case should be checked frequently, replace the quality and production volume in time.
4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.

Shandong AlPa is a research and development of ROD PIN MILLS OF LTCC Glass Powder with 20 YearsEnterprises, after years of precipitation and accumulation, experienced, with multiple patented technologies.In the past many years of Rod Pin Mills of LTCC Glass Powder, there have been tens of thousands of devices at home and abroad, often with customers to order our products again, enough to explain the reputation of Shandong Alpa Rod Pin Mills of LTCC Glass Powder.Welcome to inquire!