Turbo Crusher for Capacitor Carbon

As is well known, Turbo Crusher for Capacitor Carbon This product technology has been widely valued by the industry.

Turbo Crusher for Capacitor Carbon work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

ALPA carbonate Turbo Crusher for Capacitor Carbon case share:
a lithium industry company is a new energy high-tech enterprise that extracts the preparation of lithium battery positive raw materials - battery-grade carbonate. The main product of sodium sulfate, battery-grade carbonate, and other products of industrial grade carbonate. The company has passed the certification of the Quality Management System, \"Environmental Management System\", ISO50001 \"Energy Management System\".
Case parameters:
Product particle size: D50: 5.5μm
Hour Yield: 900kg

Turbo Crusher for Capacitor Carbon material is not small, the material is more accumulated in the silo The line knots, the material moisture, the material appears in the silo, and the silo cone design does not have the rest of the material. Solving silo does not small materials suggests design phase to fully understand the properties of materials, such as pile specific gravity, liquidity, moisture resistance, rest horn, particle size, flammable and explosive properties. Using auxiliary measures, such as air disc, air hammer, air blowing, vibration discharge mechanism, artificial hitting, etc. The pulverizer is an apparatus for ultrafine pulverized dry materials with air separation, heavy polishing, and shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

Turbo Crusher For Capacitor Carbon's feeding system is one of the key components, often encountered problems in actual use,For example, the silo is not affected, the feed is not uniform, and even can't feed.Simple analysis of non-uniform feeding of feed is more sticky or fluidity, and the design of the feeding system is designed.Feeding uneven resolution suggests based on material properties systemic solution, such as silo structure, auxiliary sheet structure, feeding valve structure, auxiliary feeding measures, and ventilation and control systems.The feeding system is generally silo, auxiliary tablet equipment, and feeding mechanism three components, depending on the material properties, the design parameters of the feeding system are different.

The above is the precautions for the use of Turbo Crusher for Capacitor Carbon products and simple solutions. Everyone must pay more attention when using.

The above is to introduce Turbo Crusher for Capacitor Carbon, you can make a brief understanding, you need to purchase eddy current pulverizer, disc air crusher, users of ultrafine crusher products please contact us