Turbo Grinder of Polyacrylate

With the continuous increase in social needs, Turbo Grinder of polyacrylate continues to improve in the use of performance, finished product quality, service life, etc., very well, which is well processed into microtes and even nanoscale fine powder, and it is already chemical. Food, pesticides, cosmetics, dyes, coatings, electrons, etc. have been widely used.

Turbo Grinder of polyacrylate is mainly due to the inclined supersonic flow through the nozzle, and the compressed air enters the pulverization region, and the material is fluid, each particle has the same motion state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

ALPA Battery Turbo Grinder Of Polyacrylate Case Sharing:

A new material company is a modern high-tech private enterprise integrating R \u0026 D, production and sales. The company teamed up with the research team of many universities to transform the international leading patented technology to high-tech products, filled the domestic technical gap. The company will rely on lithium-electric positive material materials as the core, with its company to form an interrelated, left and right support, collaborative support, comprehensive utilization cycle industrial chain.
Case parameters
Product particle size: 2-45um
Hour Yield: 200-300KG

What should I pay attention to? Before running, the operator needs to confirm the feed tube entrance Whether there is foreign matter at the exit. Whether there is any raw material at the exit. If the foreign matter is found to handle a clean and then boot.

When the grading machine is operating normally, in order to maintain the stability of the grading, the pressure of the supply tube compressed gas is required to be monitored. Check if the dust collector pressure loss of the laboratory classifier is stable.
Decompose, cleaning, inspected, and maintaining the laboratory classifier must be disconnected to avoid danger.

The above is a matter of use of Turbo Grinder of Polyacrylate, you can pay more attention to us!