Ring Roller Pulverizer with quartzite

Ring Roller Pulverizer with Quartzite as a clean, efficient, high-level, high-yield of advanced crusher models in crushing, is very extensive, from a few of dozens of micro-test test, Hundreds of tons of large production, Ring Roller Pulverizer with Quartzite: The particle size distribution is narrow, the average particle size is fine; the powder has good shape, the product is purity; suitable for low melting point, thermal drugs; good sexy, less pollution; Easy; crushing - mixing - dry online operations, etc. have been widely recognized by the company.

What factors affect the performance parameters used by Ring Roller Pulverizer with quartzite?

The following is a detailed description:

1. Feed granular control

Most Ring Roller Pulverizer with Quartzite has a certain upper limit requirement for the particle size of the feed. After entering the pulverization cavity, it can be sufficiently accelerated before collision and crushing with other particles. It is difficult to completely accelerate after large particles enter the pulverized cavity, which will allow them to stay in the machine too long, resulting in too high energy consumption. Therefore, in large-scale production of ultrafine powder, it is an effective way to pre-ground the raw material of the particle size is an effective pathway for energy saving.
2. Working medium

Currently, the working medium of Ring Roller Pulverizer with Quartzite is mainly compressed, superheated steam, inert gas, and the like. The choice of working fluid has a certain impact on crushing effects and economics. Superheated steam is superior to air in fluidity and critical flow rates to achieve higher flow rates and uniform flow fields. However, using superheated steam as a working fluid, it must be ensured that it is still in an overheating state before entering the product capture device, otherwise the material is condensed.
3. Feeding speed

Feeding speed is an important parameter reflecting gas flow grinding production capacity. During the pulverization process, the optimum ratio of the intake flow rate and the feed speed is the key to improving the crushing efficiency. In general, under certain intake flow conditions, the feed speed is proportional to the particle size of the product. However, the feeding speed is too fast, which will increase the particle density, mutual interference, disadvantage of the particles, and difficult to achieve the sufficient and effective collision between particles, affect the crushing effect; although the feed speed is too slow, the particles stay in the crush area The time can be extended, which will reduce the particle density, reduce the collision rate, resulting in a decrease in production capacity and an increase in unit production energy consumption.
4. Granular limit

Ring Roller PulverIzer with quartzite In the pulverization process, as the material particle size is reduced, the crystallization and intensity of the material increases. After reaching a certain degree, the particle size of the material is no longer reduced or reduced, that is, the crushing limit of the material is reached. At this time, the material specific surface area increases, the surface activity of the particles, the particle agglomeration and grinding are in a dynamic equilibrium state, even if the grinding time is prolonged, it is difficult to further reduce the particle size of the material.


ALPA Buckwheat Powder Ring Roller Pulverizer with Quartzite Case Sharing:
A food company is a large joint venture specializing in the production and sales of beverage food.
From the development of a single variety to the production of various products, the products produced are all over the country.

The company has PET filling machine from SASIB, Italy, a PET filling machine, a PET filling machine, Italy SIPA, a PET blower, Italy SIPA, PET blower. The annual production capacity reached 300,000 tons. The company has passed ISO9001 quality system certification, and GMP and HACCP specifications are implemented and certified.

Case parameters:
Product particle size: D50: 3-45UM
Hour Yield: 1-5kg

Ring Roller Pulverizer with Quartzite is a crusher, any mechanical equipment, There must be a certain precaution before use, so you must check the precautions to operate, minimize the damage rate, then what is the precaution before using a jet ball mill? Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.

3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.

4, the pulverizer does not have foreign matter or debris. If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.
As a 20-year powder engineering equipment manufacturer, Shandong, Shandong, has more than 3,000 customers at home and abroad, has always led the front of the industry, so before consulting, you need to provide crushing materials. Feature information, enterprising granular parameters, production yield range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, anti-dust pollution, etc.), professional engineers provide appropriate equipment models or system solutions. Welcome to inquire.