Impact Mill Machine with Stone Powder

Impact Mill Machine With Stone Powder's use in the current stage can be said to be important, AlPA has been committed to the development and application of equipment such as grading machines for many years, and we produced during many years of development. The classifier has gradually begun to develop in the direction of modernization, and we believe that we can provide a complete set of production planning programs in a large range.

Impact Mill Machine with Stone Powder temperature increases, when the temperature of the working fluid is too high, the flow rate of the gas increases. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy.
When titanium powder is pulverized by superheated steam, the vapor pressure is usually 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after pulverized surface can be lower.

AlPA Composite Powder Impact Mill Machine With Stone Powder case Share: This customer is a renewable resource company that requires a different particle size selection of composite powder to select ultrafine powder less than 30 μm. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T

Welcome major composite powder manufacturers to visit, incompetent experiments.

The privacy of the useful life and quality of Impact Mill Machine with Stone Powder has the following points:

1. Material properties.
In general, the pulverizer can accommodate all brittle materials, but due to the different material properties, the pulverization performance is also different. Due to the intensity, density, hardness, viscosity, shape and electrical performance of different materials, inevitable The difference in crushing effect is caused, wherein the strength of the material is an important factor, while the material that is too high can also result in a decrease in the life of the gas flow grinding.
2. Use time.
If the crusher is working continuously, it will also affect the service life of gas flow grinding, greatly increasing its failure probability.

Shandong AlPa focuses on the production, development, sales of powder engineering equipment such as crusher, grader, and modifier for 20 years, small productionThe ultra-fine pulverizer is composed of three parts of the host, auxiliary machine, and electronically controlled gas stream, airflow grading, mechanical pulverization, flexible realization of gas flow, airflow grading, mechanical powder, suitable for 325 mesh -10000 mesh (45μm-1 μm), suitable for a variety of crushing scenes, from research institutes, college laboratories, new products, new materials, new materials, new materials, and new materials.It is necessary to make the device selection according to the actual needs.Welcome new and old customers to come to consult!