Cell Crusher With Solid Electrolyte

Cell Crusher With Solid Electrolyte plays a vital role in the current industrial production. In major minerals, chemical industry, pharmaceutical industry, food manufacturing industries are widely used. With the continuous development of Cell Crusher With Solid Electrolyte, the various major industries are especially medical, the food industry has put forward new purity in the pulverization process. Requirements, it is desirable that the powder can be kept clean. In traditional Cell Crusher With Solid Electrolyte, carbon steel, stainless steel is generally used as a lining material of Cell Crusher with solid Electrolyte.

Cell Crusher With Solid Electrolyte The temperature is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

ALPA Pigments Cell CRUSHER with Solid Electrolyte Case Sharing: This customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment, the quality of the product is to improve the product. After more than the same type of equipment, we finally selected our AlPa's Cell Crusher With Solid Electrolyte. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.

Technical parameters:
finished particle size: D90: 13μm;
Production capacity: 130kg / h

How to maintain ultra-fine Cell Crusher with solid electrolyte, introduce the following points Everyone:

1, the pulverizer runs around each week, it needs to be stopped, check if the filter dust is blocked, clean the filter dusting film.
2, the bearing is marked, and the high temperature butter is added regularly, and the bearing is lubricated and maintained.
3, before the production, the air machine operation, check the equipmentAbnormal noise, every two months, downtime check is loose.
4, before each shift is parked, the air machine is loaded, and all the materials of the cavity are all discharged.

If the later period is intended for ultra-fine classifiers, precision grading machines, jet grading machines, you can directly contact us, product quality is guaranteed, prices are fair, good service, welcome everyone to buy!