Ring Roller Grinder with SDS Dry DesulFurization

Ring Roller Grinder with SDS Dry DesulFurization is one of the common ultra-fine pulverization methods, widely used in ultra-fine pulverization or fine pulverization of materials such as non-metallic mine, chemical, chemical, metallurgical and other industrial materials, with product particle size, particle size distribution Narrow, smooth surface surface, particle rules, high purity, high activity.

The distinction between the ultrafine pulverizer and the ordinary pulverizer in the crush:
The ordinary pulverizer can only be smashed into 200 mesh, and 200 mesh is 75 microns. It is the size of the flour, and the ordinary flour is about 80 mesh 160 mes, that is, 90 to 180 microns, this is the thickness of the ordinary pulverizer to print powder.
The ultrafine pulverizer can be super micro-pulverized, can be smashed to 10,000 mesh, 10,000 mesh is 1.3μm, which is equivalent to the particles of the flour, and then pulverized into 70 copies, each size is 10,000 mesh, can It is very thin.

ALPA airgel Ring Roller Grinder with SDS Dry DesulFurization case Share: This customer is a high-tech enterprise in R \u0026 D, production and sales of nano-energy, fireproof, and insulation new materials, in the production process Ultrafine pulverizer needs to be used, and multi-party examine the last purchase of our Alpa's Ring Roller Grinder with SDS Dry DesulFurization.
Technical parameters:
Finished granularity: D90: 15-30UM

Ring Roller Grinder with SDS Dry DesulFurization is a more accurate mechanical, during daily use and maintenance, some details still need The operator's attention. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In production, a certain number of materials must be maintained in the airflow grinding chamber. In the case where the flow rate of the pulverized gas is not changed, the material in the grinding cavity is large, the gradient current is large, and the material is small in the grinding cavity, the gradient current is small.
In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.
If the feeding speed is too fast, the device will overload.
Regular maintenance equipment, often check whether the air supply pressure meets the pressure required, and the gas flow grinding motor, after 3,000 hours of operation, or long-term shutdown and long-term storage, should be cleaned in a gas flow grinder nozzle and grinding The inner wall of the cavity and attached to the material grading portion to prevent the effect of gas flow grinding on the grinding effect.

Shandong AlpaIt is a company with more than 20 years Ring Roller Grinder With SDS Dry DesulFurization. After years of deposit and accumulation, experienced and has multiple patented technologies.In the end of Ring Roller Grinder with SDS Dry DesulFurization, there have been tens of thousands of devices at home and abroad, often with customers to order our products again, enough to explain the reputation of Shandong AlPa Ring Roller Grinder with SDS Dry DesulFurization.Welcome to inquire!