Hammer Pulverizer with Garlic Peel

The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
1. Hammer Pulverizer With Garlic PEEL's operation rules: Prepare materials before the start of the production order before the start of the production order. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Hammer Pulverizer with Garlic PEEL starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, Hammer Pulverizer with Garlic PEEL's closed and inspection The main procedures are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the input and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


ALPA Battery Hammer Pulverizer with Garlic Peel Case Sharing:
A energy company is a battery positive material production company with multiple production bases. The company's business scope includes new materials and main products research and development, battery materials and their accessories research, etc., the company has won many national-level honors such as national technology innovation demonstration enterprises.For many years, the Chinese lithium-electric positive material industry competitive brand list is ranked.
Case parameters:

Hour Yield: 300kg

A must pay attention to it before use, you must pay attention to use, operation, make it damage rate Down to the lowest, what should you pay attention to before using Hammer Pulverizer with Garlic PEEL?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.

4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.

ALPA technology developed crushing equipment has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.