Pin pulverizer with coating

Because Pin Pulverizer with Coating is widely used in all walks of life, research and development of classified machines at home and abroad pays great attention. In the current market, there is a great development space.

PIN Pulverizer With Coating Technology Design and Manufacturing is a core job.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.
ALPA Pigment PIN Pulverizer With Coating Case Sharing: This customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment, improve the quality of the product, after many other types of equipment, finally chose our AlPa Pin Pulverizer with coating. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.

Technical parameters:

Finished granularity: D90: 13μm;
Production capacity: 130kg / h

How should I operate when using Coating?
Crusher started before starting First, use the hand to scroll the rotor, check the jug, hammer and rotor operations are flexible, there is no bumps in the shell, the rotation direction of the rotor is not the direction in which the direction of the machine arrow is consistent, the power machine and the pulverizer are smooth? Outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low

affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations. If there is found that there is vibration, noise, the bearing and the body temperature is too high, the appearance of the outer spray should be discontinued.Look, exclude the failure of the sustainable work.

ALPA designated PIN Pulverizer with Coating equipment has gained a very good reputation in actual production applications, and also won the praise of users and friends.If you need to buy Pin Pulverizer with Coating, please feel free to contact us.