Impact Grinder with Glass Powder

Impact grinder with Glass powder as a clean, efficient, high fineness and high yield in an advanced pulverization mill model is widely used, to yield a few tens of grams from a few grams while the testing microtest one hundred tons of several large-scale production, Impact grinder with Glass powder with its: narrow particle size distribution, average particle size of the fine; good powder morphology, high purity; suitable low melting point, heat-sensitive drugs; confined good, less pollution; operation easy; crushing - mixing - drying line operation, and other major features have been widely recognized by enterprises.

The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Impact grinder with Glass powder according to whether the moving parts, can be divided into static and dynamic classifier classifier. Impact grinder with Glass powder development is getting better. Many industries need to control the particle size of fine powder.

alpa barite Impact grinder with Glass powder Case Study: The client is specialized in barite mining, powder processing and sales of large-scale comprehensive enterprise group, before the client are imported from abroad barite grinding equipment. Later, by understanding, knowing the ultrafine pulverization equipment of our ALPA Co., Ltd., in terms of performance, in terms of foreign devices, far exceeding the same type of equipment, far exceeded the same type of equipment. Finally, after several visits, from our company we purchased Impact grinder with Glass powder.
Technical parameters:
product size: 1250 mesh
capacity: 1.2-1.5T

Impact grinder with Glass powder is a mechanically more precise, in daily use and maintenance of the Some details still need to focus on the operator. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In production, a certain number of materials must be maintained in the airflow grinding chamber. In the case where the flow rate of the pulverized gas is not changed, the material in the grinding cavity is large, the gradient current is large, and the material is small in the grinding cavity, the gradient current is small.
In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.
If the feeding speed is too fast, the device will overload.
regular maintenance equipment, always check gas pressure meets the desired pressure comminution, jet mill and the motor, the device operating 3000 hoursAfter the long-term shutdown and long-term storage, it should be cleaned on the inner wall of the airflow grinding machine nozzle and the grinding chamber and attached to the material grading portion to prevent the gas flow grinding on the grinding effect.