Hammer Pulverizer with struntium carbonate

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Hammer Pulverizer with struntium carbonate can effectively improve the level of massage of materials and greatly improve productivity. Hammer Pulverizer with struntium carbonate has received much attention, and the prospect has also been optimistic about many people.

Hammer Pulverizer With strontium carbonate is to change the linear and surface impact grinding of conventional grinding machines to space 3D impact grinding, and take advantage of high-speed air flow generated by jet in the material flow of the crushing chamber. The pulverization region produces a gas-solid pulverization and grading circulating fluid effect on a similar fluid state, and improving the efficiency and energy integrated utilization of impact crushing.

The high-speed airflow generated by the jet impact can be fully utilized to the material flow of the pulling chamber than the other conventional methods. The average energy consumption is reduced by 30% to 40%. Since the impact-crushing area and the gas-solid flow zone are placed in the intermediate space of the pulverized chamber, the impact corrosion of high-speed airflow driven materials is improving, and the jet impact grinding process is improved. The most severe wear problem greatly reduces the possibility of material pollution, using high purity nitrogen, argon and other protective gas as a working medium, prevent oxidation, low-loop operating gas consumption, low cost. During the fully closed-loop operation, no dust is flying, and there is no contamination of the environment, and it is unharitten about the human body.

Alpa Aluminum Pink Hammer Pulverizer With Strontium Carbonate Experiment: A environmental protection technology company needs to grade aluminum superficition of aluminum silicate due to production needs, because uncertain demand can not be achieved, so feed Experiments, by experimenting our ALPA air grade machine equipment, the aluminum silicate ultrafine powder provided by the company can be classified, and finally the product particle size obtained by the experiment: D90: 18.3 μm, yield: 460kg / h Add the amount.
Welcome all major powder grading needs manufacturers, visit the factory, incoming experiments.

Hammer Pulverizer with struntium carbonate should be maintained and maintained

1. Before using it, check all standard parts for all standard parts, and the belt is not tightening.
2, the spindle operation direction must conform to the direction of the arrow shown on the protective cover, otherwise it will damage the equipment, and may cause human damage.
3, check the electrical appliance is not intact.
4. Check the hardware such as metal-free materials in the equipment crushing room, otherwise it will damage the tool, affect the equipment operation.
5, the material must be checked before crushing, and there is no metal material hard article to be mixed to prevent the cutter or cause combustion.
6, the oil cup on the device should often be injected into the lubricant to ensure that the equipment is operating normally.
7. Stopping the feeding before the shutdown, if it does not continue to be used, clear the in the machine.
8. Check the tool with the screen on time is damaged. If it is damaged, it should be replaced first.
9. When using the timing, there is a small oscillation, so it is necessary to connect the handle to the handle to avoid accidents.

Shandong AlPa supplies a variety of Hammer Pulverizer with struntium carbonate.If you need to buy Hammer Pulverizer with strontium carbonate, please feel free to contact us.