Pin Pulverizer for Ceramic Paint

With the development of society and life, the demand for PIN Pulverizer for Ceramic Paint is getting bigger and higher in the industry, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.

PIN Pulverizer for Ceramic Paint is suitable for microcarried machinery of materials such as synthetic resins and instruments. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.

ALPA Cassava Starch PIN Pulverizer for Ceramic Paint Case Sharing: This customer is a new panel industry company, dedicated to providing professional and excellent plywood new fillers for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.

Technical parameters:

finished particle size: 98% over 325 mesh
Production capacity: 2T


PINT Vibration Causes and solutions can be from the following aspects Perform:

1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.

2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.

The Shan Dong Alpa is a scientific and technological private enterprise that produces a variety of airflow pulverities, integrating development, manufacturing, and application. The main product model has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.