Cell Mill Machine for Methyl Cellulose Ether

With the rapid growth of China's economy, high-energy mining machinery industry, especially Cell Mill Machine for Methyl Cellulose ether will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy fluidized bed jet mills and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.

Cell Mill Machine for Methyl Cellulose Ether Transforming to the high-pressure air flow of pulverization kinetic energy into the periphery of the crushing cavity is also the airflow distribution station, the airflow passes through the Ravar nozzle accelerates supersonic airflow into the crushing room After that, the material and the venturi nozzle enters the crushing chamber synchronous acceleration grind.
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.

A electromechanical company is mainly dedicated to production equipment such as push bokeh, roller furnace, mesh furnace and other products. New energy batteries, electronic components and other fields. The company has always adhered to the principle of \"people-oriented, innovation first\". The company has established a good relationship with multiple international companies. With exquisite technology, we will have our customers' support and trust. We will give back to our customers with quality products and services to make better contributions to electromechanical needs.
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 600kg

1, Super Smash The machine and power unit should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Power machine andWhether the shredder is lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

For more information, please pay attention to Shan Dong Alpa. The company mainly has airflow pulverizer, airflow mill, pharmaceutical gas flow pulverizer, disc air pulverizer, eddy current pulverizer.