Vibration Pulverizer of Magnesite Stone

In the classification operation of industrial production at this stage, the use of Vibration Pulverizer of Magnesite Stone is mainly targeted for the effective crushing of solid particles, and is a commonly used comminution equipment in the ultrafine pulverization process.

The Vibration Pulverizer of Magnesite Stone forms a set of crushing systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided, friction, shear and pulverized, and the crushing material is pulled down with the wind turbulence. Airflow movement to the hierarchical region, under a powerful centrifugal force generated by high speed rotation, so that the crude material is separated, and the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizer to continue pulverization. . Since the crushed chamber structure of the Vibration Pulverizer of Magnesite Stone is simple, it is easy to manufacture, so it is widely used.

ALPA Light Bagne Vibration Pulverizer Of Magnesite Stone case Share: This customer is a device company, focusing cement, mine, chemical, electric power, metallurgy, etc., mainly engaged in rough grinding such as these industries. Equipment, the customer needs a more suitable airflow classification equipment for its customers, and has been used to select our ALPA air classifier. Buy two devices. Product particle size: D80: 15μm hour yield: two 15t / h.

Our AlPA classifier can support ball mills, vertical grinding, Raymond mill, mechanical mill, etc., welcome customers to visit, incompetent experiments.

Super Micro Vibration Pulverizer of Magnesite Stone's correct usage:

1, the ultrafine pulverizer and power unit should be securely installed. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Whether the power machine and the pulverizing machine are lubricated. 4Efficiency.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

The equipment market is changing, and the current Vibration Pulverizer of Magnesite Stone has certain needs, but the society is constantly evolving, no matter what industry needs to keep up with the times,Leading the industry.