Vibration Mill Machine for Iron Powder

In numerous pulverization, Vibration Mill Machine for Iron Powder has become one of the most mainstream pulverization techniques with a small particle size, a narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.

Vibration Mill Machine for Iron Powder is applied to the ultrafine pulverization of the material. After the material is extracted, the properties of the powder will change, and it is highly viscosited after being affected. . Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design.

Shan dong alpa design and developed materials were significantly effective in the crushing of materials.

Vibration Mill Machine for Iron Powder Compressed Gases The high-speed jets generated by the feed nozzle The material particles in the bucket are introduced into the disc shock chamber 3, and several jet nozzles are provided around the crushing chamber. The high-speed fluid is sprayed in the direction, producing an ultra-high-speed swirl in the crushing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized.

When the particles are pulverized to the pulverizing particle size below the pulverized particle size, the centrifugal force of the particle movement is reduced, and the pulverization is separated from the center of the center, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact.
Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles is not fully utilized, so the production energy consumption is still high.
AlPa Cassava Starch Vibration Mill Machine for Iron Powder case share: This customer is a new type of panel company, dedicated to providing professional and excellent plywood new fillers for plywood industry customers. The company needs to be used in the production process of the company. Multi-party examine, finally purchased the CSM1100-V mechanical grinder from our AlPa.

finished particle size: 98% over 325 mesh
Production capacity: 2T


How to install Vibration Mill Machine for Iron Powder, the following content hopes to help you .

2, before the traditional Chinese grinder work, clean processing materials must be selected.Hard metal, such as metal or stones, can not be mixed into the machine, so as not to damage parts or faults.
3, before the machine is opened, check whether the components of the machine are firm and reliable.Everything is normal, so you can work.
4, turn on the power supply, turn for 1-2 minutes, check whether the operation is normal, normal conditions, can put the material.When the crusher is working, the operator cannot leave.Once the sound is abnormal, the power supply should be disconnected immediately.In the new pulverizer raw material, the exit is fixed with a long bag.
5. When using the pulverizer, if the power supply voltage is too low, do not use it to avoid damage to the motor.The power supply is normal, it is not easy to damage, and the production efficiency is high.

Vibration Mill Machine for Iron Powder has a lot of normal use, and I want to know more about the ultra-fine gas flow classifier, welcome to consult with us!