Turbo Mill Machine of Cocoa Cake

Turbo Mill Machine Of Cocoa Cake is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

Turbo Mill Machine of Cocoa Cake The high-pressure air flow as a pulverized kinetic energy is transformed into a crushing cavity peripheral, which is the airflow distribution station. The airflow passes through the Raval nozzle accelerates the ultrasonic speed air flow into the pulverizing chamber. After the material and the venturi nozzle enters the crushing chamber synchronous acceleration grinding .
Since the flow cycle of the jet of the crushing chamber and the animal feed, the particles and the particles and the fixed target wall hit, collide, friction, and grind. The fine particles were opened into the center of the pulverizer, and the cyclone separator was entered at the drive of the heart flow, and the coarse powder was thrown into the periphery of the pulverizing chamber, and cycled under the action of centrifugation and continued to be pulverized.

AlPa Quartz Powder Turbo Mill Machine of Cocoa Cake Case Sharing:

A silicon fine powder company has the main products with molten stone sand, molten silicon fine powder, soft composite silicon fine powder, high purity ultrafine silica, active silicon powder , Crystalline silicon fine powder, spherical silicon fine powder and other specifications are complete.
Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour yield: Sakuction efficiency 60-90%

Turbo Mill Machine of Cocoa Cake Job Safety Application Basic Requirements

1
2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.
At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6Work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.

Shan Dong Alpa is a scientific and technological private enterprise that produces various airflow pulverations, airflow mill, medical and air flow crushers, disc air thrower, and needs to purchase such products.Users can contact us.