Hammer Mill Machine for LTCC Glass Powder

With the continuous advancement of pulverizer technology, Hammer Mill Machine for LTCC Glass Powder has been familiar with people. The most popular pulverized equipment is now the Hammer Mill Machine for LTCC Glass Powder. It has a wide variety, available for laboratory, home and factory use. It has a wide range of production, high energy consumption, high automation, and high classification quality.

Hammer Mill Machine for LTCC Glass Powder has a wide range of pulverized granularity, simple and convenient, but during the pulverization process, there is often a case where the crushing effect is different.

The crushing effect is mainly affected by the following factors:

The temperature and pressure of the gas ratio, the feed particle size, the working fluid, and the pulverization aid. The gas-solid ratio of the pulverizer in crush is an important technical parameter and an important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. But if the gas is too high, not only will waste energy, but will even degrade the dispersion performance of certain pigments.

When pulverizing hard materials, there is a stricter requirement for the particle size of the feed. In terms of titanium powder, it is necessary to control 100 to 200 mesh when pulverizing calcination; the material after pulverizing surface is generally 40 to 70 mesh, and cannot exceed 2 to 5 mesh.
So, should you choose how high pressure when crushing? Those skilled, this is mainly dependent on the comminutability and fineness requirements of the material.

ALPA carbonate Hammer Mill Machine for LTCC Glass Powder case Share: This customer is a company producing, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, etc., in its sales of lithium carbonate It is found that the current customer needs is ultrafine powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchasing a number of Hammer Mill Machine For LTCC Glass Powder for our AlPa.

Technical parameters:
Finished particle size: D50: 5-8μm
Production capacity: 450kg

When you purchase Hammer Mill Machine for LTCC Glass Powder, you need high pulverity And no loss. However, before buying, it is necessary to fully understand the internal structure of the crusher and the advantages and disadvantages in the production application. After fully understanding, we can better choose and apply, today we will learn about Hammer Mill Machine for LTCC Glass Powder:

1. Low powder temperature: no cooling system during continuous operation, the resulting powder temperature is not less than 50 degrees;

2. It can be applied to any fiber,High toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%;

3. Ultrafine pulverizer can be wet by adding water, alcohol or other liquidsThe method is pulverized or protected by the introduction of gas.

After understanding the characteristics of the ultrafine pulverizer, you should pay more attention to it when you purchase later, so you will choose a superfine pulverizer you satisfied.

For friends who want to know other crusher industry knowledge can also log in to the website.If you are interested in our Hammer Mill Machine for LTCC Glass Powder, please feel free to contact us.