Pin Mill Machine for Pole Piece

pin mill MACHINE for Pole Piece is a crushing device commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

pin mill MACHINE for POLE PIECE is a speed, collide with each other, or collide with a target, and a crushing effect is collided with the target.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.



ALPA crystal sorbitol PIN MILL MACHINE for Piele Piece case Sharing: Taiwan's cosmetics companies need a large-capacity of transistor sorbitol crushing production line, through our Shandong Alpa agents understand To our company can customize the servicing equipment. After many incident experiments. Finally purchased a Pin Mill Machine for Pole Piece of our company.

Technical parameters:

Finished granularity: 10-200 目
Production capacity: 10T


There is a lot of problems that need to be considered by PIN MILL MACHINE for Pole Piece.

1. To analyze the type of equipment selected, what is the design principle and other equipment, what is the structure, and what kind of role will have, only fully analyze these problems, will make the selected jet The classifier is fully in line with your own production requirements.

2, to clearly select the selected equipment, which components are easily worn, and the wear member replacement is required, and whether the auxiliary equipment is required during operation, which equipment, etc. Rational control of these will save time and financial resources to future production.
3, for the classified machine to buy, to the production plant area, because the equipment costs have a large part of the equipment in the construction plant, and one equipment is designed to makeThe product is very complicated, and the equipment manufacturer cannot be fully introduced. The equipment technical indicators given are only used as reference only when they choose equipment, and it is impossible to fully represent the parameters of the device.
4. When purchasing a grading machine device, try to purchase the associated auxiliary equipment together, so you can complete the installation at one time, save time, and put into production smoothly.
Shandong AlPa is a 20-year experience manufacturing company with Pin Mill Machine for Pole Piece equipment, with a number of patents, welcome to inquire!