Pin pulverizer of shell

Pin Pulverizer of Shell's balance performance, only need to be produced in a smooth ground place, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

For the service life of the Pin Pulverizer of Shell, it has kept well to keep it in mind.
1, for the newly purchased equipment requires novice necessary to understand its operating specifications. If it is a novice operation, it is necessary to prevent unnecessary losses during the operation.
2, if the machine is abnormal, if the machine is abnormal, it is necessary to keep the mechanical personnel to repair debugging and turn off the power. Non-designated personnel prohibit private commissioning or disassembly machine components during the maintenance process. When repairing commissioning, you must turn off the machine power.
3, the PIN Pulverizer of Shell is cleaned in time after use. Keep the internal cleaning of the Pin Pulverizer of Shell to avoid oxidation of the material and the inner contact.


ALPA Battery PIN Pulverizer Of Shell Case Sharing: Shandong Yantai Chemical Materials Company, in 2020, Pin Pulverizer of Shell purchased a specially smashing battery material from our company. Technical parameters finished particle size: D50: 8-12UM production capacity: 50kg / h

Pin Pulverizer of Shell's daily maintenance

1, during production, the temperature rise of the bearing must be checked often At 50 ° C, the check should be stopped, and the reason is to troubleshoot.

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.

3, if the loss case should be checked frequently, replace the quality and production volume in time.

4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.
5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.


The performance characteristics of various series models have different performance characteristics, different particle size, different production efficiency, production and productionUnlike the environment, the price of processing equipment is also different, customers can consult the ALPA engineers to purchase appropriate models and specifications according to their own conditions, welcome to inquire.