Hammer Mill Machine of Gel Silica

Since Hammer Mill Machine of Gel Silica is widely used in all walks of life, the research and development of classified machines at home and abroad pays great attention. In the current market, there is a great development space.

Hammer Mill Machine of Gel Silica powers the adiabatic expansion at the nozzle by compressed air and compressed gas. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product.

In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize.
The air pulverizer has an upward nozzle under the bottom of the pulverized chamber, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by a nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.

AlPa Peel Peas Hammer Mill Machine of Gel Silica Case Sharing: The company uses the food professional processing enterprises in R \u0026 D, processing and sales, and has been discovered by multi-examination or our AlPa's Hammer Mill Machine of Gel Silica. need.
Technical parameters:

Production capacity: 2T +/- 10%

In general, there are some sounds in operation. Hammer Mill Machine of Gel Silica will definitely have broken sounds when crushing raw materials, which is normal. However, if the sound turns a noise, if the sound becomes too loud, it will become a problem. So how do I solve the phenomenon of excessive noise? Let's take a look at it.
1. Add a lubricating oil on the rotating part, and adjust the bearing if the bearing and the shaft are; if the bearing wear is resistant, the bearing will be replaced.

2. There will be noise during the pulverization process. cool downSet, the water is distributed in the crushing chamber, which can be used to reduce the temperature.

3. Install the muffler on the fireplace of the pulverizer.
4. Damping equipment, such as using damping boards.

Welcome everyone to inquire!