Rod Pin Pulverizer of 3D Printing Materials

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, there is only constant innovation, continuously improve your own technical level, and continuously improve your own products can make the Rod Pin Pulverizer of 3D Printing Materials industry has a broader development space.

High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the power of Rod Pin Pulverizer Of 3D Printing Material, the thickness of the material is separated from the separation, the fine particle size of the pulverized wheel into the cyclone separator and dust removal, and the crude particles continue to be pulverized.

The pulverizer produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the pulverization requirements of the material. The crusher has a greater amount of treatment, energy saving, simple operation, and low maintenance costs.

AlPa Phosphate Rod Pin Pulverizer Of 3D Printing Materials Case Sharing: The customer's main business is the production and sales of special powder for rust-proof pigments and diamond tool industries. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Product Parts: D97: 18UM
Hour Yield: 80kg / h

Ultrave Rod Pin Pulverizer of 3D Printing Materials Correct Usage:
1, Ultrafine Crusher and Power Unit It should be installed firmly. If the ultrafine pulverizer is fixed, it should be fixed on the cement; if the pulverizer is a mobile operation, the unit should be installed on the base made of angle iron, and ensure the power machine (diesel or electric motor) and the pulverizer The belt wheel groove is in the same turning plane.
2, after the pulverizer is installed, check the fastening of the fasteners of each part, if there is loose to tighten. At the same time, check if the leather belt looseness is appropriate.
3 Power machine and crushWhether the machine is lubricated.
4, do not casually replace the pulley to prevent the transition chamber to produce explosion, or the speed is too low to affect the work efficiency of the pulverizer.
5
6. At any time, you should pay attention to the operation of the pulverizer, and the feed should be evenly charged to prevent blocking, do not have a long time overload.If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.

Welcome to visit Shandong AlPA website, company specializing in the production and development and service of Rod Pin Pulverizer of 3D Printing Materials product technology, high-energy technical experts, professional after-sales service team, solved our customersWorries.