Pin Mill Machine of Zircon Sand

pin mill MACHINE OF Zircon Sand As a clean, efficient, high-level, high-yield of advanced crusher models in the pulverization of Western medicine raw materials, from a few tens of grams of trace test Large-scale production of hundreds of tons of production, air flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermal drug; good sealable, low pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

A pin mill Machine of Zircon Sand costs high, if you want to use Pin Mill Machine of Zircon Sand for a long time, please pay attention to the following:

1. In the production process It should often check the temperature rise of the bearing, when the temperature rise exceeds 50 ° C, should stop the examination, find out the cause, and troubleshoot.
2. When the new machine is running, the transmission belt is easy to eliminate, so it should be noted to adjust the appropriate tightness of the belt to ensure the life of the belt.
3. Test and timely replacement of vulnerable parts should be performed in time to ensure quality and production.
4. The wear of the blade and bushing should be continuously checked. If the productivity is lowered, the particle size is thick after wear, and the wear is immediately replaced.
5.pin Mill Machine Of Zircon Sand Host and level score bearing use 2 special grease (265-295 degrees) lubrication.
6. The replacement period of the bearing is 2000 hours, and the amount of oil filling of the bearing chamber gap is 1 ≤ 2 (try) or 3 ≤ 4 (try), if it is not too much, the bearing temperature Will be too high.
7. The replacement period of the spiral feeder is 4,000 hours, and ordinary calcium based grease is added. Standard operation to exchange for longer use of airflow crushers.

The above is a 7 point introduction to the daily maintenance of Pin Mill Machine of Zircon Sand for you.


ALPA Quartz Sand PIN MILL MACHINE OF Zircon Sand Case Sharing: This customer needs to grade quartz sand, compared to a number of powder equipment manufacturers, and finally passed the experiment, and finally Select our AlPA classifier device. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.
Ultraflight PIN MILL MACHINEOf Zircon SAND Machine Maintenance and Staff:
1, often inspecting the fastening of each component, preventing it from falling off, damaging the machine.
2, each oil injection hole should be refueling, and the bearing portion is cleaned every half year to fill the lithium-based grease.
3
4, when the machine is deactivated, the external debris should be cleared, and the grease is filled with all the rotating parts, stored in the storage of air drying, non-corrosive gas.