Ring Roller Pulverizer Of Biomass Carbon

With the development of society and life, the industry's demand for Ring Roller Pulverizer of Biomass Carbon is getting bigger and higher, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.

The main application of RING ROLLER PULVERIZER OF BIOMASS Carbon determines its extensive application range and fineness of finished products.

Typical materials are: super hard diamond, silicon carbide, metal powder, etc. High purity requirements: ceramic color, medicine, biochemistry, etc., low temperature requirements: medicine, PVC. By changing the normal air of the gas source into an inert gas such as nitrogen and carbon dioxide gas, it can be used as an inert gas protection device. Suitable for crushing of flammable and explosive and oxidative materials.

Alpa Xiashi Powder Ring Roller Pulverizer Of Biomass Carbon Experiment: A mining company needs to be sorted by Xiashi powder. Through the experiment of our ALPA can do product particle size: D90: 16.8μm, Yield: 246kg / h 加 加 量

Welcome to the majority of major manufacturers with Xixia stone graded demand to the factory, and collective experiments.

Ring Roller Pulverizer Of Biomass Carbon is widely used, do you know how to use it correctly? The following content hopes to help you.
1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.

2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.

(4) After the filter bag is a period of time, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

Shan dong alpa produces various types of crushers, can be used in various materials such as medicinal materials, ingredients, chemicals in powder, and the highest effect can reach.Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.