Ring Roller Pulverizer for Adhesive

The airflow pulverizer plays a vital role in the current industrial production. In various major minerals, chemical industry, pharmaceutical industry, and food manufacturing industries are widely used. With the continuous development of airflow crushers, the various major industries are particularly medical, and the food industry puts forward new requirements in the pulverization process. It is desirable that the powder can be kept clean. In the manufacture of traditional airflow pulverizer, carbon steel, stainless steel is generally used as the lining material of the airflow pulverizer.

Ring Roller Pulverizer for adhesive is applied to the ultrafine pulverization of the material. After the material is extracted, the properties of the powder will have a large change, and it appears to be high viscosity after being affected. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design.

Shan dong alpa design and developed materials were significantly effective in the crushing of materials.
RING ROLLER PULVERIZER for Adhesive Compressed Gases The high-speed jets generated by the feed nozzle The material particles in the bucket are introduced into the disc shocking chamber 3, and several jet nozzles are provided around the crushing chamber. The high-speed fluid is injected in the direction, producing an ultra-high-speed swirling in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized.

When the particles are pulverized to the pulverizing particle size below the pulverized particle size, the centrifugal force of the particle movement is reduced, and the pulverization is separated from the center of the center, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact.
Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles is not fully utilized, so the production energy consumption is still high.
Alpa Pectin Ring Roller Pulverizer for Adhesive Case Sharing: Yantai A pectin shares, the company needs to purchase ultrafine pulverized equipment for pulverizing gelatin. Through multi-party investment and incoming experiment, the company purchased our AlPa Ring Roller Pulverizer for Adhesive as its pectin ultrafine pulverized equipment.
Technical parameters:
finished particle size: 60-200 目

Production capacity: 300kg

Ring Roller Pulverizer for AdhesivE is a crusher, any mechanical equipment, there is a certain preventive measures before use, and must check the precautions to operate, minimize the damage rate, then the precaution before using the jet ball mill isWhat?Here are some introductions.
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, the pulverizer should be lubricated in accordance with the requirements so that the machine is operating normally.

3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.

4, the pulverizer does not have foreign matter or debris.If it should be handled in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss.
6. If damage should be replaced immediately, certain components should be checked regularly.

Shandong AlPa supplies a variety of Ring Roller Pulverizer for Adhesive.If you need to buy Ring Roller Pulverizer for Adhesive, please feel free to contact us.