Vibration Mill Machine for Garlic Stalks

Vibration Mill Machine for Garlic Stalks is one of the common ultrafine pulverization methods, widely used in non-metallic mines, drugs, chemicals, metallurgical and other industry materials, ultra-fine pulverization or fine pulverization, with product particle size, narrow particle size distribution The surface of the particles is smooth, the particle rules, high purity, and high activity.

Many manufacturers who want to make a crushing process will choose to purchase a Vibration Mill Machine for Garlic Stalks, but not all crushers can apply production and processing, erroneous processing methods will make the pulverizing velocity quick. The mill is wear is too fast, and the inner cavity of the pulverizer of the material should be selected when the material hardness is too large.

The device operates for a long time in a higher crushing pressure, which requires uniformity of cyclical replacement losses.
The product after the crushing products are generally single peaks. If there is a double-peak or multimodal main reason, the pulverization pressure is unstable. The solution is based on the gas supply of gas source equipment to meet the amount of gas required for work, ensuring that the lowest gas supply pressure of the gas is high than the working pressure.
The feed speed is unstable. Solution to check if there is a blockage at the feed valve; the material is not very viscous, uniform liquidity, and the stable control feed speed. A filter cake is formed in the pulverizer chamber. The solution is suspended, and the filter cakes in the crushed chamber will then return to the production.
ALPA pea protein Vibration Mill Machine for Garlic Stalks Sharing: This customer is a food company in Russia. After looking for a lot of powder equipment companies, it did not find a suitable equipment. It has been influenced by the company's production and operation, and finally I saw the ultrafine pulverization of pea protein before our website. Finally, through the incoming experiment, I finally determined the purchase of the Vibration Mill Machine for Garlic Starks of our company.

Finished particle size: 400 mesh
Production capacity: 1.5T


How to correct the VIBRATION MILL MACHINE for GARLIC STALKS?

The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
rating machine, etc.If the heat-sensitive material is separated, the power of the main motor is slightly lower than the rated power.The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.
Shandong AlPa focuses on the production, research and development, sales of powder engineering equipment and other powder engineering equipment and other powder engineering equipment, the production of small ultra-fine pulverizer is three parts: mainframe, auxiliary machine, electric controlIt consists, the gas flow is pulverized, the airflow classification, the mechanical powder is integrated, flexible to realize the gas flow, airflow grading, mechanical powder is integrated, 325 mesh-10000 mesh (45μm), suitable for a variety of crushing scenes, from research institutes,College laboratories, new products and tests in the factory research institute.It is necessary to make the device selection according to the actual needs.Welcome new and old customers to come to consult!