Impact Pulverizer of Chemical Raw Materials

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. Impact Pulverizer of Chemical Raw Materials can improve the level of massage of materials and greatly improve productivity. Impact Pulverizer of Chemical Raw Materials have received much attention, and the prospect has also been optimistic about many people.

Impact Pulverizer of Chemical Raw Materials should be installed in place to use convenient place in the venue.

Before working, it is necessary to pick up the processing material, no metal, stone, etc., the hard substances are mixed into the machine, so as not to damage the parts or failures in the machine. Check that each component is firm and reliable before booting. Everything is normal, the side can turn on the power, idle for 1-2 minutes, check whether the operation is normal, everything is normal, it can be pushed.
When operating, the operator cannot leave. Once the sound is abnormal, the power should be disconnected immediately.

When machining raw new friends Chinese medicine crusher, the discharge opening should be tied to the bag. When the pulverizer is in use, if you encounter the power supply voltage, do not use it, so as not to damage the motor. When the power supply voltage is normal, the machine is not easily damaged, and the production efficiency is high.

a lithium industry company is a new energy high-tech enterprise that extracts the preparation of lithium battery positive raw materials - battery-grade carbonate. The main product of sodium sulfate, battery-grade carbonate, and other products of industrial grade carbonate. The company has passed the certification of the Quality Management System, \"Environmental Management System\", ISO50001 \"Energy Management System\".
Case parameters: D50: 5.5μm
Hour Yield: 900kg

Impact Pulverizer of Chemical Raw Materials generates certain noise, resulting in noise main reasons Yes:

(2) When the device is running. Generate vibration sound; (3), the friction between the turntable or the hammer and the drug; the rotating part itself is friction.

For the cause of noise, the main solution is as follows:
(1) adding oil to each rotating member, if the bearing and the axis are misalign, adjust the bearing wear, replace the bearing;
( 2) The heat generated during the broken process also producesNoise, and cooling through the crushing chamber water cooled sleeve, the muffler is mounted in the air intake port of the pulverizer; (3) damping the damper and other devices.

Users who want to view crusher related information can also log in to our website!