Ring Roller Mill Machine for Soft Magnetic Powder

Ring Roller Mill Machine for Soft Magnetic Powder can be used for important or need to be grounded to granular product processing, AlPA ultrafine pulverizer products are good, affordable, factory direct sales, also push after-sales maintenance service for customers, service attitude is good [ 123]

1. Simple structure Simple, convenient, convenient, and only one person can complete the operation, disassembly and cleaning.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, RING ROLLER MILL MACHINE for Soft Magnetic Powder causes the finished product to purity, no impurities, and non-pollutant materials due to their pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.

The above is the application for you about Ring Roller Mill Machine for Soft Magnetic Powder in the industry.


ALPA Buckwheat Powder Ring Roller Mill Machine for Soft Magnetic Powder Case Sharing:
A food company is a large joint venture specializing in the production and sales of beverage food.
From the development of a single variety to the production of various products, the products produced are all over the country.
The company has PET filling machine from SASIB, Italy, a PET filling machine, a PET filling machine, Italy SIPA, a PET blower, Italy SIPA, PET blower. The annual production capacity reached 300,000 tons. The company has passed ISO9001 quality system certification, and GMP and HACCP specifications are implemented and certified.

Product particle size: D50: 3-45UM
Hours Yield: 1-5kg

Temperature rises in the bearing must often be checked frequently in the production process, when the temperature rise exceeds 50 At ° C, the check is stopped, and the reason is to troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. Host andThe graded flow bearing is lipid, and the 2nd special lipid is used. The replacement period of the bearing is around three months, and the filling of the grease is 1/2 of the inner space in the bearing cavity, and it is not too much to fill the grease. Otherwise, it will causeThe bearing temperature is too high.The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease.In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part.It is strictly forbidden to turn the handle on the stop.The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines.After four or five months, new oil should be replaced.

Shan dong alpa is a world-renowned particle and powder processing system provider. If you want to consult, you can get the answer you want by asking Shandong Alpa to get the answer you want, but it is not just a device.Price, there may be powder technology solutions in your industry, welcome to call us.