Ring Roller Pulverizer for Modified Corn Starch

It is well known that Ring Roller Pulverizer for Modified Corn Starch has received extensive attention from the industry.

Ring Roller Pulverizer for Modified Corn STARCH is mainly after the material is accelerated through the nozzle, and the compressed air enters the flow of the crushing area, and the material is fluid, each particle has the same Motion status. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

ALPA Ring Ring Roller Pulverizer for Modified Corn Starch case Share: The customer is a research institute in a well-known university in China, and the cerium oxide is ultrafinely pulverized during the study. Buy our AlPa Ring Roller Pulverizer for Modified Corn Starch.

Cerium oxide mechanical milling machine technical parameters:

finished particle size: 200-2000 mesh
Production capacity: 10-30kg

As a crusher, Shandong AlPa has been working to customers Provide greater value, the fineness, production capacity, and installation venues of each project are important information for custom selection, pre-sales service, 24-hour online customer service to answer questions, provide ideal communket production line solutions And accordingly, it provides the factory quotation to increase the escort for the cerium oxide crushing project.

Let me introduce the operation method of Ring Roller Pulverizer for Modified Corn STARCH.

1. Before using the pulverizer, first check whether all fasteners of the machine are tightened and the belt is fastened.

2. The spindle direction must be consistent with the direction of arrow on the shroud, otherwise it may damage the machine and cause personal injury.
3. Check if the crusher is complete.
4. Check if the gas flow pulverizer has a hard object such as metal in a crushing room, otherwise it will damage the tool, affect the machine.
5. You must check the purity of the material before crushing. Metal hard materials are not allowed to avoid damage to the tool or cause combustion.
6. The oil cup on the machine should always note the full lubricant to ensure that the machine is operating normally.
7. Stopping before stopping.If you do not continue, remove the residers from the machine.
8. Regular inspection tools and screens are damaged.If damage is damaged, it should be replaced immediately.
9. There will be slight vibration when using the fuselage.Be sure to tighten the cover to connect the handle to avoid accidents.

Today, I will introduce you to here. If you want to know more, please continue to pay attention to our website.