Vibration Pulverizer for Dental Ceraminics

In numerous pulverization mode, Vibration Pulverizer for Dental Ceramics has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

The advantage of Vibration Pulverizer for Dental Ceramics, a small amount of wear-resistant components made of special hard wear raw materials, small size, light weight, convenient replacement replacement. The Vibration Pulverizer for Dental Ceramics is filtered, and the material is repeatedly collided with a multi-shaped high-pressure airflow intersection. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. The Vibration Pulverizer for Dental Ceramics has a high-speed blow to 20m / s, which affects other high-speed motion. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.

ALPA carbonate Vibration Pulverizer for Dental Ceramics case share: This customer is a company producing, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, which is found in the production of lithium carbonate. The current customer needs is ultrafine powder for lithium carbonate, so it is upgraded for the production line of lithium carbonate, purchasing our AlPa's multiple Vibration Pulverizer for Dental Ceramics.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg

When you buy Vibration Pulverizer for Dental Ceramics, you need to high crushing rate and no loss. However, before buying, it is necessary to fully understand the internal structure of the pulverizer.And the advantages and disadvantages in the production application.After fully understand, we can better choose and apply. Today we will learn about the Vibration Pulverizer for Dental Ceraminics:

1. Low powder temperature: no cooling system during continuous operation, the resulting powder temperature is neverLess than 50 degrees;

2. It can be applied to any fiber, high toughness, high hardness or a certain moisture content; for pollen or other spore plants, the material destroying the cell wall can break through 95%;

3. Ultrafine pulverizer can be chipped by adding water, alcohol or other liquid, or protective pulverization by introducing gas.

After understanding the characteristics of the ultrafine pulverizer, you should pay more attention to it when you purchase later, so you will choose a superfine pulverizer you satisfied.

Vibration Pulverizer for Dental Ceramics has a lot of use, and I want to know more about the ultrafine gas flow classifier, welcome to consult with us!