Rod Pin Pulverizer of Glass Slag

Environmentally friendly Rod Pin Pulverizer of Glass Slag has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the stage has gradually replaced the traditional rough mechanical processing. Production has become a new leading leading to the implementation of technological innovation upgrades at this stage.

The main advantage of ROD PIN PULVER OF Glass SLAG is to change the linear and surface impact grinding of conventional grinding machines to space 3D impact grinding, and take advantage of high-speed airflow generated by jet in the substance flow of the pulverization chamber. To produce a gas-solid pulverization and grading circulating flow effect of a similar fluidized state, improving the efficiency and energy integrated utilization of impact crushing.

The high-speed airflow generated by the jet impact can be fully utilized to the material flow of the pulling chamber than the other conventional methods. The average energy consumption is reduced by 30% to 40%. Since the impact-crushing area and the gas-solid flow zone are placed in the intermediate space of the pulverized chamber, the impact corrosion of high-speed airflow driven materials is improving, and the jet impact grinding process is improved. The most severe wear problem greatly reduces the possibility of material pollution, using high purity nitrogen, argon and other protective gas as a working medium, prevent oxidation, low-loop operating gas consumption, low cost. During the fully closed-loop operation, no dust is flying, and there is no contamination of the environment, and it is unharitten about the human body.

ALPA desulfurizer ROD PIN PULVER OF Glass SLAG case Sharing: The company is a high-tech company that requires a desulfurizer crusher, investigating a number of powder equipment manufacturers at home and abroad, finally selected Our Alpa's Rod Pin Pulverizer of Glass Slag.

Technical parameters:
Finished particle size: 200 mesh 90% passed
Production capacity: 4-5T

Rod Pin Pulverizer of Glass Slag has many core accessories, and these attachments are also Fragile parts, once you don't pay attention to maintenance, it will cause serious consequences, especially the breakage of the airflow milling spindle can cause the downtime, and cannot estimate the output loss. The following sections describe the reasons for the gas flow grinding main axis.

The cause of the airflow grinding main shaft is easy to damage:
1. Since the pulverizer is a long-time crushing and ground bulk ore, the mechanical impact will cause fatigue damage to the spindle, if it is operated, the surface of the spindle Will wear, if you don't pay attention, cracks are generated.
2. The air supply will pass the airflower overload. When gas flow is used, you need to feed it properly, and each machine is limited. If you exceed this, you can run in the loadIt is easy to damage the part, which will affect the overall service life of the airflow.
3. During mining and transportation, ore is often mixed with some waste metals. When these objects are in electromagnets at the upper portion of the belt, the electromagnet cannot beExcluding, causing these materials in ore and mud into gas flow, resulting in frequent iron, resulting in frequent impact on the spindle and other portions.
The above is the reason why the Rod Pin Pulverizer of Glass SLAG spindle is easily damaged.

I hope everyone can buy the airflow crusher product for the heart!