Turbo Mill Machine Of Noodles

Currently, Turbo Mill Machine of Noodles has gradually entered people's lives, more and more plants, and companies are using the equipment.

In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
1. The rules of the Turbo Mill Machine of Noodles are as follows: Prepare materials before the start of the production order, prepare materials. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Turbo Mill Machine Of Noodles starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures of Turbo Mill Machine of Noodles are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


ALPA Quartz powder Turbo Mill Machine of Noodles case share:
A mining company specializes in the development and production of quartz sand, silicon fine powder,
company produces various models Quartz sand and water-washing dry stone sand and water-shaped, water, precision cast, furnace, refractory, ceramic glaze, ceramic billet, rubber, coating, etc. Welcome to the factory, guide, negotiate business!

Product particle size: D100: 11.5UM
Hours Yield: 380kg

Turbo Mill Machine of Noodles showed dust leakage Problem, can be processed from the following aspects
1. Install the filter dust removal equipment. Temperature crushingThe dust generated by the machine can be used with foam dust removal, wetting agent dust removal, ultrasonic atomization technology, composite filter bag dust removal, folding dust cloth bag, and dust removal. The user can also consider the overall performance of dust removal, so combined dust removal is used.
2. Due to the mild leakage during the production process, the dust will appear, causing pollution to the work area. Therefore, the user needs to guarantee the sealing property of the pneumatic grinding machine.

4. Production enterprises should be equipped with corresponding protective supplies as required for air compressor operators. The operators should also wear protective supplies in accordance with regulations.
5, do a good job in the maintenance and management of existing dust equipment, guarantee its normal operation and use dustproof. The maintenance management of high temperature crushers seems simple, and actual operation requires good attitude and habits.


Shan dong alpa production of various types of crushers, can be used in various materials such as medicinal materials, ingredients, chemicals, etc., with the highest effect. Our products are non-standardized products, which will customize their products according to your needs, and make a reasonable offer according to the product.