Vibration Pulverizer of Salt

Vibration Pulverizer Of Salt is a very common and common pulverizer. It has a wide range of applications involving many industries.

The working process of Vibration Pulverizer of Sal is mainly after the material is accelerated through the nozzle, and the flow of compressed air enters the pulverization region, and the material is fluid, each particle has the same motion state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

ALPA Trimats Vibration Pulverizer of Salt Case Sharing:
A electromechanical company is mainly dedicated to production equipment such as push booth, roller furnace, mesh furnace and other products, and products are widely used in new energy batteries. , Electronic components and other fields. The company has always adhered to the principle of \"people-oriented, innovation first\". The company has established a good relationship with multiple international companies. With exquisite technology, we will have our customers' support and trust. We will give back to our customers with quality products and services to make better contributions to electromechanical needs.
Case parameters:
Product particle size: D50: 15μm
Hour Yield: 600kg

It is necessary to clean Vibration Pulverizer of Salt after long-term use. Before the airflow pulverizer is cleaned, all machines should be disassembled. When cleaning, the power supply can be turned off, and the remaining dust can be removed directly with a brush. We must remember to clean it layer by layer. When the displacement is unloading, you can remove the four screws on the base, then remove the hopper. When sieved, the air pulverizer door can be opened directly, and finally the screen can be disassembled. After removing the movement gear, release the fastening nut first, then separate the live teeth from the spindle. Then remove the active gear and place it safely. Remove the fixed gear, remove the screw and remove the fixed gear. Be careful when disassembling the air pulverizer and must never be damaged by machine components.

Welcome everyone to choose our Shandong AlPa, company specializing in the production and development and service of gas flow crusher product technology, the company provides customers with safe and reliable Vibration Pulverizer of Salt products and services, solving the worries of customers .